November 3, 2017 - 20 comments

Silly Sir Visits Germany: Our Gold-Winning Weihenstephaner Hefeweissbier Recipe

Note: post updated March 10th, 2018 with batch 2 revision and notes.

Writing to you live from Silly Sir Brewery/a tiny apartment somewhere in Toronto it's me again - here to share with you the fantastic learnings we had drinking beer and visiting breweries in Berlin and Munich, Germany. Yes: we went to Weihenstephan and and sampled fresh Weihenstephaner Hefeweissbier and yes, it was the best part of the trip.

Ah, Germany. Where the reinheitsgebot (German beer purity law) exists as both a source of national pride, and frustration. As you may know already, German brewers can only use water, malt, hops, and yeast in their recipes if they want to call it a proper beer. While several of the professional brewers I spoke with in Germany found this limitation to be archaic there remained a palpable respect and pride surrounding the law. There is a reason why German beers are so tough to replicate and taste so great - they've been fine tuning them for hundreds of years. German brewers work with fewer variables which means they get to know their ingredients quite intimately. They are forced to get creative to achieve nuanced flavour profiles and develop their brewery's fingerprint.

...Right?

Well, hmm Mr. Silly Sir, you ask, can they at least add CO2 to their beer?

NEIN! No! Not even CO2! (that is unless it is produced naturally by the actual fermenting beer itself in a process called krausening)This means CO2 produced by fermentation must be retained (through pressure) and/or recaptured and added back into the beer later on (Speise).

That means all this Silly Sir stuff with the delicious lemongrass would be nischt nischt. I'm honest enough with myself to know that Silly Sir would likely be laughed out of Germany for this very reason!

But, I digress. Here's what you need to know:

  1. I really love wheat beer. It is an underrated style.
  2. Of all the wheat beers I've tried Weihenstephaner Hefeweissbier is my go-to favourite (and is the gold standard as far as I'm concerned)
  3. We visited Weihenstephan, Germany and toured the Weihenstephaner brewery and scored intel on how they brew their delicious, candy-of-a-beer.
  4. Though delicious and gold-medaling, I've failed to get it quite right (thus far).

The Weihenstephaner Tour

Weihenstephaner Brewery is located in Weihenstephan, Germany which is an hour's train ride outside of Munich. From the top of the hill wherein it is located, you can see the Swiss alps on the horizon. It's a delicious sight.

Our tour was conducted by two experienced Weihenstephan brewers. I wasn't sure which secrets they'd be allowed to reveal about their brewing processes, but they were surprisingly open about how things were done.

The Weihenstephaner Hefeweissbier Recipe

The brewers confirmed that the Weihenstephaner Hefeweissbier is brewed using:

  • 60% Wheat Malt
  • 40% Pilsner Malt.

That's it. Simple. One of the brewers recommended using 20% Pilsner and 20% Munich malt if attempting it on a homebrew scale, which is what I ended up doing. As is probably expected, they use Weyermann malts exclusively.

Complimentary tasting and tasting glasses...

The Water

I went with 0.09 grams/gallon of Gypsum and 0.35 grams/gallon of Calcium Chloride to bring out the malt and enhance mouthfeel.

The Mash

The Weihenstephaner Hefeweissbier is brewed using a traditional double decoction mash whereby one third of the mash is removed from the mash tun, brought to a boil, and added back to the mash tun in order to "step up" the mash temperature from protein rest, to conversion, conversion to sach (see gallery picture below for time and temperature targets). This is done twice before mash-out and produces a beautiful, toasty breadiness in the final beer. For more on how this occurs, read up on maillard reactions. It is a critical component of getting this style just right.

The Boil

Hallertau Mittelfruh hops are added added at 60, and 10 minutes to bring the beer to about 15 IBU. There are no whirlpool additions. No clarifying agents are added in accordance with the reinheitsgebot. Hefeweizens (hefe: yeast; weizen: wheat) are traditionally quite cloudy due to the suspended yeast, so you wouldn't want it too clear anyways.

H. Mittelfruh

Fermentation

Their 900 hL fermentors stretch far beyond the ceiling...

They told me the beer is fermented at around 20C using Weihenstephaner yeast which is available commercially to homebrewers as WYEAST 3068 (or WLP300 - apparently the same thing). That being said, I'm skeptical that it's fermented at just 20C. Take a look at this sweet espionage shot:

Look at fermentation tank 2 and 7...

It looks like tank 2 and 7 are both fermenting around 21.45C, which is higher than the 20C I was told. Perhaps they set the tanks to 20C, but the actual recorded temperature due to the yeast activity is closer to 21.5C. This is very curious and here's why...

Why It's Curious (pay attention here)

As a general rule of thumb the higher you ferment with this particular strain of yeast, the more banana esters you achieve. The lower you ferment, the more clove phenols you achieve. I apparently fermented my beer at a lower temperature than the Weihenstephaner hefe, but got almost exclusively banana esters whereas theirs has a nice blend of clove and banana (though it still tilts banana). How can this be?!

Well here's the kicker: you want to stress the yeast out a bit. The brewers at Weihenstephan's brewery told me that they intentionally underpitch a little bit in order to achieve the desired aroma and taste of Weihenstephaner Hefeweissbier. I have no idea what their actual pitch rate is, but would love to get this information. If you somehow score it, let us know.

Carbonation - Weihenstephaner Style (In Accordance With the Reinheitsgebot)

As noted, you cannot add sugar to the beer. You cannot add your own secondary CO2 to the beer. The Weihenstephan brewery allows their beer to ferment to near terminal gravity, before adding additional pure unfermented wort from a fresh new batch back into the fermenters for the yeast to chew on. They then seal it off. It's essentially: bottle conditioning in the tank and with actual wort. This is said contribute the beer its famous, full mouthfeel.

I attempted this in order to stay true to the recipe. If you are going to attempt this, make sure you have a friend who knows how to do the calculations, and ensure you're being extremely sanitary (I froze a small amount of virgin wort until it was ready to use for a speise addition). Let it do its thing, give it more time than you think it needs, and cold crash it before connecting any lines. This will allow for the CO2 to be fully absorbed in the beer. I recommend connecting a valve to check pressure in order to monitor it and ensure your PSI is within range.


The Side-by-Side & Competition Results

Weihenstephaner Hefeweissbier vs. Silly Sir's Hefeweissbier!

I entered our beer into my local homebrew club's annual Brew Slam Competition and lo-and-behold it took gold! Overall, I'm quite happy with how it turned out and is a very good example of the style however ours is notably different from the classic Weihenstephaner Hefeweissbier. It really is a challenging beer to get exactly right.

Cheers to Michael Hancock - brewmaster of Side Launch who guest judged our gold-winning beer.

Appearance: Despite my best efforts, the beers look quite different. Since kegging mine, the cloudy yeastiness has all but dropped out of suspension whereas the Weihenstephaner beer has its traditional cloudiness preserved. It's beyond me how they achieve this because I allowed it to sit for a couple weeks at the same temperature undisturbed to cold-crash as well, but the yeast does not seem to fall from suspension. It's also a couple SRM darker than my hefe, which is presumably due to increased maillard reactions occurring in the mash. Or heck, maybe even oxidation.

Right: Weihenstephaner Hefe. Left: Silly Sir Hefe

Aroma: The Weihenstephaner beer has a moderate toasted breadiness to it that mine lacks. It's also quite yeasty. While it's high in banana aroma, it's also got a definitive clove presence.  My beer is cleaner with slight crackery notes. I also detect only the faintest hint of cloves, with much more banana coming through.

The one thing Weihenstephaner Hefeweissbier lacks is our masterful head retention.

Taste: essentially mirrors the aroma, however the Weihenstephaner beer is slightly sweeter than mine.

Mouthfeel: notable difference in the softness of mouthfeel with the Weihenstephaner having what people often perceive as finer bubbles in terms of carbonation. Really this may have more to do with water chemistry than anything else.

Lessons Learned for Batch 2 (what I'll do differently)

  1. To address the lack of toasted breadiness in both flavour and aroma I will double decoct exactly 1/3 of the beer for each step in order to get it to the desired temperatures. In my attempt I decocted far less than 1/3 each time. I will hold it at a boil for 15 minutes instead of just 10.
  2. I will ensure a thicker mash to grist ratio.
  3. To address the lack of comparable clove aroma, I will under-pitch the yeast according to an online pitch rate calculator (and will hopefully gather intel on Weihenstephan Brewery's pitch rate, and try to mirror it).
  4. I will soften my water profile a bit by lowering the CaCl I add to the water.


What I Did Differently for Batch 2

I just recently finished batch 2 which is decidedly superior to batch 1, but is still missing the full, sweet, fresh toast/breadiness of Weihenstephaner's hefe. It's still not quite perfect. If batch one was around 70% similar to Weihenstephaner's hefe, batch two is around 85% similar to Weihenstephaner's hefe. The biggest difference is that breadiness.

Water

Slightly more CaSO4 and slightly less CaCl to balance it out by lowering the hardness slightly...

Gypsum: 0.11 g/gal
CaCl: 0.27 g.gal
Campden: split between sparge and mash water.

Mash

My mash ratio this time was 2.48 l/kg whereas my first batch was closer to 4 l/kg (way too thin). I also brought the decoction to a boil for 15 minutes instead of ten. Furthermore I added a ferulic acid rest at 112F for about 10 minutes before decocting anything. This step is said to enhance the clove phenols.

Fermentation

Fermented slightly lower at 19C for 3 days and raised it to 20C for the remainder to get a better balance of cloves and banana. Underpitched ~2/3 of a month old smack pack of WYEAST 3068 - do not use a starter it is inadvisable.

Tasting Notes

A big step forward and an overall general improvement over the first batch, I think. Overall there's more fresh-baked breadiness (if you've had a Weihenstephaner you know precisely what I'm talking about) but still not nearly enough.

Appearance: very similar this time around - the haziness and colour are almost identical (but we're still not quite as dark). We've actually still achieved superior head retention - why is that? Age? Wheat percentage/protein? Different mineral profile? Both glasses were thoroughly cleaned and rinsed together before pouring.

Left: our clone; right: Weihenstephaner's hefe. Weihenstephaner started with more head, but it quickly disappeared.

Aroma: We've got significantly more cloves this time around than our first batch - the ferulic rest and lower fermentation temperature appear to have worked pretty well as it's now much closer to the Weihenstephaner beer. We've achieved a better balance between banana and cloves, but we still have a little less clove compared to the gold-standard. While we have more toasty breadiness going on than before, it's still the biggest variable separating ours from Weihenstephaner's hefe. I also perceive the faintest hints of black pepper in beer.

Taste: Again, pretty closely mirrors the aroma, however ours is not as bready-sweet as Weihenstephaner's hefe. I strongly suspect there must be more unfermentable sugar in the Weihenstephaner beer and will degas a sample of a sample and measure their FG before formulating my next recipe in order to strategize and determine whether or not I should add more unfermentables into the beer (as well as my methods on how to achieve such).

Mouthfeel: Nailed it in terms of carbonation (carbonated to taste - sampled a fair amount from my keg). Didn't use the speisse method this time because it's way more effort than it's worth, I think. Ours finishes slightly drier.

What I'll Do Differently For Batch 3

  1. Will further lower my mash to grist ratio, to bring out the breadiness (really low - 2.3 or so). Will decoct onto an already very hot vessel to scorch the grain slightly. Will add two minutes to the decoction (17 total).
  2. Will lower the wheat percentage to 55% and increase the pilsner malt to 25%. Will reduce munich malt to 15% and add 5% Munich II - maybe this will also increase sweetness and perceptions of breadiness.
  3. Will lower the fermentation temperature by 0.5C (18.5%) for the first three days before raising it to 20C.

Your thoughts? What can we do to achieve that subtle, wonderful signature Munich fresh toastiness of the Weihenstephaner beer? If you live in the GTA and feel you've achieved that intangible toasty element, let's talk and compare beers and recipes (seriously: email me matt [@] sillysir.com). 


I hope you found this little write-up useful, and I hope you learn to embrace this wickedly underrated, oh so fabulous style of beer (if you haven't already). Hit us up with questions below, ya dig?

† Note: the reinheitsgebot still exists in Germany as a modified version of its former self. The revised Vorläufiges Biergesetz (Provisional Beer Law) states that pure sugar can also be added to beer and still be marketed as beer. Other ingredients and adjuncts can in fact also be added to beer provided it isn't marketed as "beer". Still, most breweries abide by the "reinheitsgebot" due to both tradition and its  power in terms of marketing. Thank you to the Redditors who corrected me. 

Published by: Matt in Brewing, Techniques & Tips, Travel Beer Blog

Comments

mr123
November 25, 2017 at 10:27 am

The lower temperature doesn’t effect how much total phenols are available it just changes the threshold at which you perceive it because of different balances of esters, higher alcohols etc.

If you want more clove aroma increase the ferulic acid rest time, this also apparently reduces isoamyl acetate (how I don’t know, I just read it in a presentation).

Careful with freezing glass, it can probably take it but all the demijohns I’ve had with labels on have strict temperature guidelines (maybe to cover themselves).

Good article and lots of great information, especially the actual recipe! I’m writing something on this style so looking forward to how your iterations get on.

Comments are closed.

    Matt
    February 22, 2021 at 6:24 pm

    Thanks for this awesome insight I hadn’t really considered this, but it will come into consideration when I brew batch 4 this spring.

    Comments are closed.

Jamie
May 16, 2018 at 11:52 pm

Hi Sillysir, thank you for your amazing Hefe recipes & tips! I tried recipe no 3 & it turned out amazing! I now would like to try making a Weihenstephaner Dunkel. Do you have a recipe for this also please?

Comments are closed.

John Spieth
March 10, 2019 at 10:09 pm

Very cool information! What about tank 1 at 22.5 C? Do you think they’re ramping it up— a couple days at 20, then 21.5, then 22.5? I’m going to try a batch tomorrow with 3% victory malt for breadiness. Thanks again!

Comments are closed.

    Matt
    February 22, 2021 at 6:21 pm

    I think this is probably the case. Thanks for your thoughts! It probably goes into tank at 20C, and they may let it free-rise to 21.5 and then hold it for the bulk of its fermentation and then let it further rise to 22.5. I’d wager a few bucks on this.

    Comments are closed.

NOPE
August 2, 2019 at 1:47 pm

Missing ingredient. It’s grapefruit, try it.

Comments are closed.

Amit
January 2, 2020 at 11:14 am

Probably late than never.
Have you used Melanoidin Malt instead of Munich. I think that can help with the bready character.
I have been brewing Hefe in microbreweries. I use Paulaner method (as heard from Fermentis reps) start at 18. Then at 8 plato I ramp to 22.5C and leave it. Cap the tank at 6 P. Let it finish to 2.5 P and crash.

Comments are closed.

    Matt
    February 22, 2021 at 6:18 pm

    Hey Amit,

    Sorry for the late response. I think I’ve given melanoidin enough of a chance now to say that I do not actually like it. It’s not quite the same to me, and even at low amounts seems to take centre stage. Is there some sort of trick?

    Comments are closed.

Matti J. Cowan
January 5, 2020 at 4:01 pm

Hey, Amit! That Melanoidin trick has been suggested to me – I may try it without a decoction, but with a ferulic, some melanoidin, and a warmer fermentation to balance out the cloves. What percentage have you used in the past?

Thanks for the suggestions. I’ll be brewing this again in the next month or two and will see how it goes!

Comments are closed.

James
January 11, 2020 at 12:14 pm

Won’t decocting 1/3 of the beer for each step make you blow past your target temperature for the next rest?

Comments are closed.

Tim
January 25, 2020 at 9:39 pm

I’ve been working on a Vitus clone over 5 itterations so far. One thing I found was Weihenstephaner is a low oxygen brewery. Though they may do decoctions, it’s without the presence of oxygen. I’ve had better luck matching their bready flavors when I try a low oxygen mash with some melanoidin.

Comments are closed.

Clive
April 9, 2020 at 9:14 am

Hi. Loved the research you did to nail this beer. I’m also trying through trial and error. My issue is with bottle carbonating and do you get any unwanted trub if you use speisse as I do when I carb with sugar? Love to know your thoughts.

Comments are closed.

    Matt
    February 22, 2021 at 6:16 pm

    Hey Clive. Sorry for the late response. I would totally embrace that settled matter by rolling the bottle to rouse it. It’s probably delicious, depending on its consistency.

    Comments are closed.

Rob
May 29, 2020 at 12:19 pm

Hi,

What are the carbonation levels you shoot for? I’m at 3,5 volumes of CO2.

Comments are closed.

    Matt
    February 22, 2021 at 6:11 pm

    This sounds right.

    Comments are closed.

Don
October 6, 2020 at 9:13 am

Hi!

Given that the Weihenstephan recipe was provided by one of theri brewmasters to BeerandBrewing.com, have you compared it and/or even tried it to compare to yours?

Comments are closed.

    Matt
    October 6, 2020 at 12:15 pm

    I have not, but I think I’ll have to try it out next time I brew a hefe. Thanks for the heads up.

    Comments are closed.

Scott
October 19, 2020 at 9:31 am

What is your starting water profile?

Comments are closed.

badbadmojo
February 22, 2021 at 4:27 pm

Hey matt – I’m taking your Rev3 recipe and making a double batch of it. Question, it seems like your starting strike water is very low (2.3L/kg, or ~1qt/lb), half of what a typical decoction suggests (2-2.5qt/lb). I am finding that (for a 10gal batch to fermenters), I’ll use 5gal strike, triple decoct, add 2gal of boiling water to hit mash out temp, and then need about 7 gal of sparge to hit pre-boil volume. It was hard interpreting the decoction profile in the picture. Let me know if that sounds right, just worried about the large vol of sparge water.

Comments are closed.

    Matt
    February 22, 2021 at 6:07 pm

    Hey badbadmojo,

    I also responded to your email – I think this may be brewhouse specific. I have only brewed this on my electric stovetop, and as such the temperature of the decocted portion doesn’t get crazy hot. If you’re using a gas flame, you can probably achieve good results with a thinner mash. And yeah, I probably just batched sparged with a lot of water. Probably inadvisable to fly sparge with the same amount because your gravity might get too low.

    Comments are closed.
%d bloggers like this: